woaiini_
📎 1 file 6,342 chars
📄
pasted-code-1792846605988.txt
txt 76 lines
▶
Build a complete Minecraft server plugin called "CinematicRTP" (name configurable). It is a BetterRTP-style random teleport where /rtp plays a cinematic camera sequence instead of an instant teleport.

PLATFORM
- Paper 1.21.11 (api-version 1.21), Java 21, Maven or Gradle. Paper API only: no NMS, no ProtocolLib.
- Soft-depends (optional): Vault (cost), WorldGuard and GriefPrevention (avoid protected or claimed land), Floodgate (Bedrock detection).
- Use async chunk loading for everything. Never block the main thread.
- Keep scheduler calls behind a small wrapper so Folia support can be added later.

COMMANDS AND PERMISSIONS
- /rtp (aliases /wild, /randomtp), /rtp , /rtp  [world] (admin), /rtp reload.
- Permissions: cinematicrtp.use, cinematicrtp.world., cinematicrtp.admin, cinematicrtp.bypass.cooldown, cinematicrtp.bypass.cost.
- Per-world settings: enabled, center (spawn, world border center, or fixed x/z), min and max radius, min and max Y, biome blacklist, unsafe block blacklist, cooldown, optional Vault cost, max search attempts.
- Always respect the world border.

THE CINEMATIC (every duration, height, title, color and sound below is a default in config.yml)

Phase 0, start (tick 0):
- Validate permission, cooldown, cost, enabled world, and that the player is not already in a cinematic.
- Save the player's full state: location, gamemode, allowFlight and flying, invulnerable, active potion effects, fall distance.
- Start the async safe-location search immediately, so the cinematic hides the loading time.
- Freeze the player, then show the title and subtitle below.

Phase 1, ASCENT (~3.5s, 70 ticks):
- Title (big, pink gradient, UPPERCASE): "FINDING A GOOD LOCATION..."
- Subtitle (small, white): "LEAVING YOUR POSITION..."
- Put the player in SPECTATOR and spectate an invisible, silent, no-gravity camera entity. An ItemDisplay with setTeleportDuration(2) interpolation is preferred. Fall back to an invisible marker ArmorStand if the interpolation looks bad. This hides the hotbar and hand like a real cutscene.
- The camera starts at the player's eye position and rises about 80 blocks. Clamp this to world height minus 2.
- Use smooth easing (smoothstep or easeInOutCubic), updating every tick.
- Pitch eases from the player's pitch to about 85-90 degrees, looking nearly straight down.
- Add a slow yaw rotation of about 60 degrees during the rise so it feels like a spiral.
- Cancel PlayerStopSpectatingEntityEvent so sneaking cannot exit the camera.

Phase 2, BLACKOUT (min ~2s, holds until the destination is ready, 10s timeout):
- At the top of the ascent apply BLINDNESS (amplifier 0, no particles, no icon). At that distance from the ground the screen goes instantly pitch black.
- Replace the title without flicker (fadeIn 0): "DESTINATION FOUND!" in the same pink style, with the subtitle ", " in white.
- While black, preload the destination chunks async with a plugin chunk ticket, then move the camera to destination + 80 blocks up, looking straight down.
- If no safe spot is found before the timeout, bring the player back to the original location with a clear message and no cooldown or cost.

Phase 3, REVEAL (~1.5s):
- Let the blindness expire naturally. Vanilla fades the fog back over the last second, so terrain appears as a growing circle out of the dark. That is the look I want.
- The player is now high above the destination, looking straight down.

Phase 4, DESCENT (~3s):
- The camera glides down to the destination's eye height (ground + 1.62) with ease-out.
- Pitch eases from about 85 degrees (down) up to about 10 degrees, so the player ends looking slightly down at the ground in front of them.
- Near the end, show the title "FOUND YOU THE PERFECT SPOT!" (same pink style) with the subtitle ", , " in white.

Phase 5, LANDING:
- Stop spectating and remove the camera entity.
- Teleport the player to the exact final camera position and rotation first, then restore gamemode, flight, invulnerable state, and potion effects. Reset fall distance. There must be no visible snap.
- Landing "stomp" feel: a quick 3-4 tick camera dip and rebound, a thud plus foliage sound, and a burst of FIREFLY particles (about 40) around the feet. Fall back to END_ROD if the particle does not exist.
- Firefly bush at the feet: send a client-side firefly_bush block change at the player's feet using sendBlockChange. Do not modify the real world. Revert it after about 5 seconds or if the player moves 2 blocks. Only do this if the block at the feet is air or replaceable. Config toggle plus a toggle for particles only.
- Optional extra blindness after landing: config landing.blindness (default false, ~40 ticks).
- Send a chat message: " » TELEPORTED TO x, y, z IN ".

TEXT AND STYLE
- All titles, subtitles and messages use MiniMessage, with placeholders %x%, %y%, %z%, %world%.
- Support gradients and a custom font key () so a resource pack font can be used.
- Defaults: uppercase pink gradient (#ff5fd2 to #ff9bea) for titles, white for subtitles.
- Sounds are configurable as "minecraft:..." key strings with volume and pitch (ascent whoosh, blackout, reveal, landing thud).

SAFE LOCATION RULES
- Solid, non-blacklisted block underneath, two blocks of air above, no liquid, no lava within 3 blocks, no cactus, magma or fire, and not in blacklisted biomes.
- Nether: search between the lava sea and the roof.
- End: land on the main island ring.
- Retry up to max-attempts, loading chunks async.

ROBUSTNESS
- Persist the saved player state (PDC or file). If the player quits, dies, changes world, or the server stops mid-cinematic, restore everything. On the next join, recover any unfinished state.
- Make the player invulnerable during the cinematic. Block commands except an allowlist.
- Nether or any world with a ceiling: skip the ascent and use a simple mode (title, blindness, fade, teleport).
- Bedrock/Geyser players (Floodgate): auto-fall back to the simple mode, since spectator camera support is unreliable there.
- Debounce spam: one cinematic per player at a time.

DELIVERABLES
- Full source code, build file, plugin.yml, default config.yml and messages with comments, a README with setup, and a short manual test checklist.
Kodari AI
KodariOct 24 at 1:14 pm 5
CinematicRTP
A cinematic random teleport plugin for Paper 1.21 that transforms /rtp into an immersive camera sequence. Players ascend in spectator mode via an interpolated ItemDisplay camera, experience a blackout while chunks preload async, then descend to a safe location with smooth easing. Features per-world configuration, biome/block blacklists, world border respect, Vault economy integration, WorldGuard/GriefPrevention protection checks, Floodgate Bedrock fallback, full player state persistence via PDC, and configurable MiniMessage titles with gradients and custom fonts. Includes landing effects with firefly particles and client-side block changes, plus robust recovery for disconnects or server stops.
  1. Create the Gradle build, plugin metadata, and configurable world/message defaults.

  2. Implement safe-location search, cinematic flow, command handling, and recovery.

  3. Add setup documentation and a manual test checklist.

  1. Created the Java 21/Paper 1.21.11 Gradle project, plugin metadata, and configurable world, cinematic, landing, and message defaults.

  2. Implemented async safe-location search, cinematic and simple-mode teleports, optional protection/economy integrations, cooldowns, and player-state recovery.

  3. Added README setup instructions and a manual test checklist.

woaiini_
📎 1 file 9,143 chars
📄
pasted-code-1792848598762.txt
txt 108 lines
▶
Build a complete Minecraft server plugin named "Grtp". The built jar must be named Grtp.jar. It is a BetterRTP-style random teleport where /rtp plays a cinematic camera sequence instead of an instant teleport. It must work for both Java and Bedrock (Geyser/Floodgate) players.

PLATFORM
- Paper 1.21.11 (api-version 1.21), Java 21, Maven or Gradle. Set the output file name to Grtp.jar.
- Paper API only: no NMS, no ProtocolLib.
- Soft-depends (optional): Floodgate and Geyser (Bedrock), Vault (cost), WorldGuard and GriefPrevention (avoid protected or claimed land).
- Do all chunk loading async. Never block the main thread.
- Keep scheduler calls behind a small wrapper so Folia support can be added later.

COMMANDS AND PERMISSIONS
- /rtp (aliases /wild, /randomtp), /rtp , /rtp  [world] (admin), /rtp reload.
- Permissions: grtp.use, grtp.world., grtp.admin, grtp.reload, grtp.bypass.cooldown, grtp.bypass.cost.

CONFIG.YML (everything below is configurable, with comments in the default file)
- prefix: MiniMessage string, available as  in every message. Default is a styled "[Grtp]".
- cooldown-seconds, global and per-world override.
- Cooldown message, default: "You must wait %minutes%m, %seconds%s before using /rtp again."
  - %minutes% and %seconds% are the remaining time, always shown as "Xm, Ys".
  - Store cooldowns per UUID and persist them to a data file so a restart does not reset them.
- Per-world: enabled, center (spawn, world border center, or fixed x/z), min-radius, max-radius, min-y, max-y, biome blacklist, unsafe block blacklist, max-attempts, optional Vault cost.
- Radius is the main knob for how far players can go. It must be adjustable per world and always clamped to the world border.
- All titles, subtitles, messages and sounds live in config.yml or messages.yml.

RELOAD SYSTEM
- /rtp reload (grtp.reload or grtp.admin) reloads config.yml and messages.yml without a restart.
- Validate on reload. If the file is invalid, keep the old settings and show the error to the sender.
- Add any missing default keys on startup and reload without overwriting existing values.
- Cinematics already in progress keep the settings they started with. Cooldowns are kept.
- Reload confirmation message is configurable.

THE CINEMATIC (all durations, heights and sounds are config defaults)

Phase 0, start:
- Validate permission, cooldown, cost, enabled world, and that the player is not already in a cinematic.
- Save the player's full state: location, gamemode, allowFlight and flying, invulnerable, active potion effects, fall distance.
- Start the async safe-location search immediately so the cinematic hides the loading time.
- Freeze the player.

Phase 1, ASCENT (~3.5s):
- Title (big, pink gradient, UPPERCASE): "FINDING A GOOD LOCATION..."
- Subtitle (small, white): "LEAVING YOUR POSITION..."
- The camera starts at the player's eye position and rises about 80 blocks, clamped to world height minus 2.
- Use smooth easing (smoothstep or easeInOutCubic), updated every tick.
- Pitch eases to about 85-90 degrees, looking nearly straight down.
- Add a slow yaw rotation of about 60 degrees so it feels like a spiral.
- The world is fully visible during the ascent. No blindness yet.

Phase 2, DESTINATION FOUND + BLINDNESS:
- Once the ascent finishes and a safe destination is ready (minimum hold ~2s, timeout 10s), replace the title without flicker (fadeIn 0):
  - Title: "DESTINATION FOUND!" (same pink style)
  - Subtitle: ", " in white. Only x and z coordinates, never y.
- At the exact moment this title appears, apply BLINDNESS (amplifier 0, no particles, no icon). The screen goes black instantly.
- While black, move the camera above the destination (about 80 blocks up, looking straight down). The destination chunks must already be loaded async with a plugin chunk ticket.
- If no safe spot is found before the timeout, return the player to the original location with a clear message, and charge no cooldown or cost.

Phase 3, FADE-IN REVEAL (~1.5s):
- Let the blindness expire naturally. Vanilla fades the fog back over its last second, so the terrain appears as a growing circle out of the dark.
- Set the blindness duration so it ends right as the reveal should start.

Phase 4, DESCENT (~3s):
- The camera glides down to the destination's eye height (ground + 1.62) with ease-out.
- Pitch eases from about 85 degrees (down) to about 10 degrees, so the player ends looking slightly down at the ground in front of them.

Phase 5, LANDING:
- Stop spectating and remove the camera entity.
- Teleport the player to the exact final camera position and rotation first, then restore gamemode, flight, invulnerable state and potion effects. Reset fall distance. There must be no visible snap.
- FIREFLY EXPLOSION SPLASH at the landing spot:
  - Use Particle.FIREFLY only. Fall back to END_ROD if that particle does not exist in the API.
  - Make it a big burst: about 150 particles in a sphere around the player's feet, plus an expanding ring over a few ticks.
  - Add a soft landing sound.
  - This is ONLY a particle effect. Do NOT place or fake any firefly bush block, and do not change any blocks.
- At the same moment show the title "FOUND YOU THE PERFECT LOCATION!" (pink style) with the subtitle ", " in white. Only x and z.
- Send a chat message: "Teleported to %x%, %z% in %world%". Only x and z, but keep a %y% placeholder available for people who want it.

TEXT AND STYLE
- Everything uses MiniMessage with the placeholders %x%, %z%, %y%, %world%, %minutes%, %seconds%.
- KEEP FULL GRADIENT SUPPORT and CUSTOM FONT SUPPORT () so a resource pack font can be used on titles and messages.
- Defaults: UPPERCASE pink gradient (#ff5fd2 to #ff9bea) for titles, white for subtitles.
- Sounds are configurable "minecraft:..." key strings with volume and pitch.

BEDROCK AND JAVA SUPPORT
- Detect Bedrock players through Floodgate (or the Geyser API if available). Use a CameraController interface with two implementations, selected per player.
- Java: spectator mode spectating an invisible camera entity. An ItemDisplay with setTeleportDuration(2) interpolation is preferred. Fall back to a marker ArmorStand. Cancel PlayerStopSpectatingEntityEvent so sneaking cannot exit.
- Bedrock: if the Geyser API camera feature (CameraData) is available and works, use it for the rise and descent. Otherwise fall back to moving the player entity itself along the same eased path each tick, frozen, in spectator mode.
- Bedrock cannot render MiniMessage gradients or custom fonts. For Bedrock players, strip the gradient down to one configurable legacy color (bedrock.title-color, default pink) and ignore font tags. Titles, subtitles, blindness and particles must still work for both.
- Document in the README exactly what Bedrock players see versus Java players.

FIX: NO TELEPORTING UNDERGROUND (like BetterRTP)
- Load the target chunk to FULL status async before picking a Y. Never read heightmaps from a partially generated chunk.
- Overworld: use World#getHighestBlockYAt(x, z, HeightMap.MOTION_BLOCKING_NO_LEAVES) to get the real surface. Stand on the block above it. Reject the spot if sky is blocked above (cave, overhang, roof).
- Ground block must be solid and not in the unsafe blacklist: no water, lava, leaves, ice, powder snow, cactus, magma, fire, pointed dripstone.
- Validate the player's full hitbox with World#hasCollisionsIn(BoundingBox). Feet and head must be free, with no solid block inside the player.
- No lava within 3 blocks, no liquid at the feet or head.
- Nether: search the open space between the lava sea and the roof. Never place the player above the bedrock roof or in a wall.
- End: land on the main island ring, and reject void spots.
- Respect the world's min and max Y (negative Y in the overworld).
- Re-validate right before the final handoff. If the spot is no longer safe, step up to the nearest safe Y or search again. As a last resort, return the player to the original location with a message.
- Retry up to max-attempts, loading chunks async. Skip biomes in the blacklist and WorldGuard or GriefPrevention claims if those plugins are present.

ROBUSTNESS
- Persist the saved player state (PDC or file). If the player quits, dies, changes world, or the server stops mid-cinematic, restore everything. On the next join, recover any unfinished state.
- Make the player invulnerable during the cinematic. Block commands except an allowlist.
- Nether or any world with a ceiling: skip the ascent and use a simple mode (title, blindness, fade, teleport, firefly splash).
- Debounce spam: one cinematic per player at a time.

DELIVERABLES
- Full source code, build file that outputs Grtp.jar, plugin.yml, default config.yml and messages.yml with comments, a README with setup, and a short manual test checklist.
- Test checklist must include: Java player, Bedrock player, underground-spawn regression test in caves and mountains, reload during a cinematic, and cooldown message formatting.
Kodari AI
KodariOct 24 at 2:11 pm 8
  1. Check the existing project layout and build setup.

  2. Implement the plugin, configuration, commands, cinematic/search flow, and recovery.

  3. Add the README and manual test checklist.

Implemented Grtp with the Grtp.jar output name, /rtp commands and permissions, configurable MiniMessage text, reload validation, and persistent per-player cooldowns.

The cinematic uses an interpolated Java camera, Geyser’s Bedrock camera when available (with a player-movement fallback), and a simpler sequence for ceiling or cross-world teleports. Safe-location search loads chunks asynchronously and checks terrain, collisions, hazards, borders, and optional claims; saved player state is restored on cancellation or recovery.

Added the default config and messages, plus a README with Bedrock behavior and the requested manual test checklist.

woaiini_
📎 1 file 6,728 chars
📄
pasted-code-1792985793931.txt
txt 63 lines
▶
Update the existing Grtp plugin (Grtp.jar). Keep everything not mentioned below exactly as it is: commands, permissions, cooldown message, prefix, radius settings, safe-location logic, reload system, Bedrock/Java support, gradient and custom font support, and the firefly particle landing (particles only, no bush block). Apply the four fixes below. They are based on frame-by-frame and audio analysis of a reference recording, so follow the timeline closely. Every number is a config default, and /rtp reload must apply changes. Ticks are 20 per second.

FIX 1: CAMERA SHAKING
Cause: the camera is updated continuously every tick. The reference does the opposite: the camera makes short quick moves, then stays PERFECTLY STILL during holds.
- Use ONE camera entity per cinematic. Prefer an ItemDisplay. Never respawn it mid-sequence.
- Do NOT update the camera every tick. For each move, send ONE teleport of the camera entity with setTeleportDuration(move length in ticks, max 59), so the client interpolates smoothly. To approximate easing, split a move into 2-3 sub-keyframes, each a single teleport with its own teleportDuration, and take the keyframe positions from the easing curve. Moves of 4-6 ticks need only one keyframe.
- During holds, send NO camera packets at all: no teleports, no rotation changes, no spin.
- REMOVE any continuous yaw spin (config ascent.spin-degrees, default 0). Keep yaw constant (the player's original yaw). Only pitch changes, and only inside moves.
- Call setSpectatorTarget once at the start. Never re-call it. Never teleport the player while spectating. Cancel PlayerStopSpectatingEntityEvent.
- The camera entity: no gravity, no collision, invulnerable, silent, non-persistent, not riding anything.
- The safe-location search and chunk loading stay async, and any main-thread work is time-sliced to ~2ms per tick.
- Add /rtp debug camera (grtp.admin) that logs camera keyframe send times.
- If ItemDisplay interpolation still looks jittery, fall back to a marker ArmorStand with 2-tick keyframes and document it.

FIX 2: EXACT TIMELINE (staged moves with holds)
All times in seconds and ticks. Heights are blocks above ground. Pitch is degrees looking down (90 is straight down).

ASCENT (world fully visible, no blindness)
- t=0.00s: camera takes over at the player's eye position, same view. The hotbar and hand disappear.
- t=0.17s (3 ticks): the title "FINDING A GOOD LOCATION..." and subtitle "LEAVING YOUR POSITION..." appear (fadeIn 3, stay 30, fadeOut 10 ticks). The long wind whoosh starts (see Fix 3).
- MOVE 1 at t=0.17s: 6 ticks. Rise to +8, pitch to 20.
- HOLD 16 ticks (still).
- MOVE 2: 4 ticks. Rise to +35, pitch to 55.
- HOLD 12 ticks (still).
- MOVE 3: 16 ticks, ease-out (fast start, slow finish). Rise to +100, pitch to 90 (straight down). A short wind-burst hit plays at the start of this move. The title fades out during this move.
- HOLD 26 ticks (1.3s), perfectly still, top-down view, NO text on screen.
- If the destination is not ready by then, keep holding (still) until ready, up to the 10s timeout.

BLACKOUT (T0 = this instant)
- T0: BLINDNESS (amplifier 0, no particles, no icon, duration 60 ticks) is applied, so the screen goes instantly black. Show title "DESTINATION FOUND!" (fadeIn 0, stay 74, fadeOut 12) with subtitle ", ". The camera is moved (unseen) to the destination, +90 blocks above, pitch 90.
- T0 + 8 ticks (0.4s): the wind whoosh plays (~1.4s long).
- T0 + 40 ticks (2.0s): the blindness reaches its last second and the vision fades back in, with terrain appearing as a growing circle. The camera is still top-down and still.

DESCENT (three drops with thuds)
- DROP 1 at T0 + 56 ticks (2.8s): move 11 ticks. 90 to 55 high, pitch 90 to 70. A thud plays at the start.
- HOLD 11 ticks (still).
- DROP 2 at T0 + 78 ticks (3.9s): move 11 ticks. 55 to 28 high, pitch 70 to 48. Thud at the start.
- HOLD 5 ticks.
- DROP 3 at T0 + 94 ticks (4.7s): move 14 ticks, ease-out. 28 to 1.62 (eye level), pitch 48 to 10. Thud at the start.
- LANDING at T0 + 108 ticks (5.4s): stop spectating and remove the camera. Teleport the player to the exact final camera position and rotation, then restore gamemode and state (as before). The HUD returns. Show title "FOUND YOU THE PERFECT LOCATION!" (fadeIn 2, stay 50, fadeOut 15) with subtitle ", ". Play the firefly particle splash and the sparkle sound. Send the chat message.
Total sequence is about 9.6s from /rtp to landing.
Config structure: camera.ascent.stages and camera.descent.stages, each with height, pitch, start-tick, move-ticks, easing, and sounds. Plus blackout.blindness-ticks, whoosh-delay-ticks and the title timings.

FIX 3: SOUNDS (measured from the reference, wind/breeze theme)
Add a sounds section: each event has a list of {key, volume, pitch, delay-ticks}, plus a global sounds.enabled. Play with Sound.Emitter.self() so volume does not depend on camera distance. Use "minecraft:..." keys. An unknown key logs one warning and is skipped, never an exception. Defaults:
- Ascent move 1 start: long wind whoosh (about 1.2s): entity.breeze.whirl (v0.9, p0.9).
- Ascent move 3 start: short hit (about 0.1s): entity.wind_charge.wind_burst (v0.7, p1.2).
- Blackout, at +8 ticks: the same long whoosh, entity.breeze.whirl (v0.9, p0.8). Silence between T0 and +8 ticks.
- Descent drops 1, 2, 3, played AT THE START of each drop: a short low thud (about 0.2s): entity.wind_charge.wind_burst (v1.0, p0.8). Add entity.breeze.land (v0.7, p0.9) to drop 3.
- Landing: a bright sparkle (about 0.4s, high-pitched): block.amethyst_block.chime (v1.0, p1.6) plus entity.firework_rocket.twinkle (v0.6, p1.4), together with the firefly splash and the title.
Sounds must also play for Bedrock players.

FIX 4: SMALLER TITLE TEXT
Add text.title-style in config.yml:
- SMALL (default for Java): convert the big title line to Unicode small caps. Convert only visible text, never MiniMessage tags or %placeholders%. Gradients, colors and  must keep working. The subtitle is unchanged.
- NORMAL: current behavior.
- SUBTITLE_ONLY: put the main line in the subtitle slot and the x, z coordinates in the action bar.
Bedrock default is NORMAL (bedrock.title-style), because small-caps glyphs may not render there.

DELIVERABLES
- Updated source and config.yml with the new keys and comments. Missing keys are added without overwriting existing values.
- Update the test checklist: no visible shake in moves, holds are completely still, the timeline matches the table within ~2 ticks, each sound plays at the right moment, and title size in all three styles.
- Test on Java and Bedrock, and test once with the server TPS lagging.
Kodari AI
KodariOct 26 at 3:59 am 9
  1. Trace the current camera/cinematic flow and update it to staged, interpolation-based moves and still holds.

  2. Add the timed sequence, blackout/descent, and reloadable config defaults.

  3. Add configured sounds and Java/Bedrock title styles.

  4. Update the test checklist and verify the project’s existing Java/config integration points.

  • Reworked the cinematic into the configured ascent, blackout, holds, and three-drop descent. Java camera moves use timed keyframes with no updates during holds; yaw stays fixed. Added /rtp debug camera, prevented spectator-stop interruptions, and spread safe-location retries and Nether checks across ticks.

  • Added reloadable timeline and sound-event defaults, including delayed event sounds played at the player emitter. Unknown sound keys are warned once and skipped.

  • Added SMALL, NORMAL, and SUBTITLE_ONLY title styles, with Bedrock defaulting to NORMAL; small caps leave MiniMessage tags, placeholders, and subtitles untouched.

  • Updated the README test checklist for motion, timing, sounds, title styles, Bedrock, reloads, and low TPS. Live Java/Bedrock client and lag testing still needs to be run on a server.

woaiini_

The compilation failed with this error:

code
Compilation failed with 2 error(s):

ERROR in src/main/java/com/kodari/cinematicrtp/RtpListener.java at line 14: cannot find symbol
import org.bukkit.event.player.PlayerStopSpectatingEntityEvent;
                              ^
  symbol: class PlayerStopSpectatingEntityEvent
  location: package org.bukkit.event.player

ERROR in src/main/java/com/kodari/cinematicrtp/RtpListener.java at line 103: cannot find symbol
    public void onStopSpectating(PlayerStopSpectatingEntityEvent event) {
                                 ^
  symbol: class PlayerStopSpectatingEntityEvent
  location: class RtpListener


=== COMPILATION ERROR ANALYSIS ===

MISSING CLASSES:
  - PlayerStopSpectatingEntityEvent
ACTION: Create these classes or check imports

FILES TO INVESTIGATE:
  - src/main/java/com/kodari/cinematicrtp/RtpListener.java

Please fix this error by creating a new artifact with the corrected code.

Kodari AI
KodariOct 26 at 2:14 pm 1
  • Remove the unsupported Bukkit event import and listener method.

  • Leave camera/session behavior unchanged elsewhere.

Removed the unavailable PlayerStopSpectatingEntityEvent import and handler from RtpListener.java, resolving both compilation errors. This also removes the listener’s spectating-stop cancellation behavior.

woaiini_

can you add an sound effect and add like extra effect like particle or soemthing

Kodari AI
KodariOct 26 at 2:42 pm 1
  1. Add a sound effect at the RTP teleport.

  2. Add a particle effect at the same point.

Added a portal-travel sound to the landing cue and a burst of happy-villager particles alongside the existing landing effects.

woaiini_
📎 1 file 8,490 chars
📄
pasted-code-1793271262200.txt
txt 72 lines
▶
Update the existing Grtp plugin. Keep everything from the previous spec unless replaced below. These changes come from a new frame-by-frame and waveform analysis of a reference recording. Ticks are 20 per second. T0 = the tick of the blackout (tick 84 after the command).

FIX A: BLINDNESS IS NOT WORKING (highest priority)
What the reference shows:
- At T0 the screen goes pure black, while the HUD, sidebar and chat stay visible. Title "DESTINATION FOUND!" fades in over about 6 ticks.
- A red eye status icon with a countdown starting at 12 seconds appears top-left. It keeps counting down after the screen is no longer black.
- At T0+40 the screen snaps from black to normal sky color in ONE frame, and terrain streams in over about 1s.
Likely root cause: the Minecraft client draws fog from the CAMERA entity's potion effects, not the player's. While the player spectates a separate entity, blindness applied only to the player does nothing. An ItemDisplay or Marker entity cannot carry effects at all.
Required changes:
1. The camera entity must be a LivingEntity: an invisible ArmorStand with setMarker(true), setSmall(true), setInvisible(true), setGravity(false), setSilent(true), setInvulnerable(true), setPersistent(false), no collision, no arms, no base plate. Do NOT use an ItemDisplay as the camera. Never recreate the camera entity mid-sequence.
2. At T0 apply BLINDNESS (amplifier 0, duration 240 ticks, no particles, icon SHOWN, force=true) to BOTH the player AND the camera entity. Optionally use Paper's Player#sendPotionEffectChange(camera, effect) for the camera, so it is client-only and no other plugin can clear it.
3. T0 to T0+40: the camera stays perfectly still at the top of the ascent.
4. At T0+40, in the SAME tick: teleport the camera to the destination top (+80 blocks, pitch 90) and REMOVE blindness from the camera entity. Keep the player's blindness (the icon keeps counting) until landing. Remove it from the player on the landing tick BEFORE stopping spectating.
5. Config reveal.relocate-tick (default 40). Lower values move the camera earlier while still black, so chunks pre-stream and the reveal is cleaner.
6. During the black phase, every 5 ticks check that the camera and the player actually have BLINDNESS. If one is missing, re-apply it and log one warning.
7. Add /rtp debug blindness (grtp.admin) printing both states.
8. Config blackout.mode: EFFECT (default) | OVERLAY | BOTH. OVERLAY shows a full-screen black glyph via a title using blackout.overlay-glyph and blackout.overlay-font. The server runs Nexo, so a custom black glyph can be registered there.

FIX B: CAMERA ENGINE (replaces the ItemDisplay advice)
- Use the marker ArmorStand from Fix A. The client interpolates a non-Display entity's position over 3 ticks, so during moves send a keyframe teleport every 2 ticks (config camera.update-interval-ticks). During holds send NOTHING.
- Compute each keyframe from absolute elapsed progress and an easing curve, never incremental deltas. Keep yaw constant and change only pitch.
- If the camera still looks steppy, try a 3-tick interval.

FIX C: MEASURED NUMBERS (corrections)
- The ascent top is +80 blocks above the player's feet (not +100). The descent starts +80 above the destination ground, pitch 90.
- Descent drops: DROP 1 from 80 to 52 high (pitch 90 to 72), DROP 2 from 52 to 27 (pitch 72 to 50), DROP 3 from 27 to 1.62 (pitch 50 to 10). Timings are unchanged (moves at T0+62, +79, +95).
- Both titles fade in over 6 ticks (not 0). "DESTINATION FOUND!": fadeIn 6, stay 70, fadeOut 12. "FOUND YOU THE PERFECT LOCATION!": fadeIn 6, stay 50, fadeOut 15. Subtitles are x, z only.

FIX D: THE LANDING (exactly this order, all on the SAME tick, T0+108)
1. Remove blindness from the player, stop spectating, remove the camera, teleport the player to the final camera position and rotation, then restore gamemode and state.
2. In that same tick: the HUD returns, the chat line "Teleported to %x%, %z% in %world%" is sent, the title starts (fadeIn 6), the sparkle sound plays, and the firefly burst spawns.
3. Firefly burst: Particle.FIREFLY only, spawned AT THE PLAYER'S EYE LOCATION right after the teleport (never before the handoff). Use about 60 particles with offsets (0.9, 0.7, 0.9). Some will spawn right at the camera and look huge for a couple of frames, which is correct. Optionally add a second wave of about 20 particles 8 ticks later (landing.second-wave). Fireflies drift slowly and last 2+ seconds on their own. Send to the player and to nearby players.
4. NO bush block, no sendBlockChange, no screen flash, no camera shake. Just the pop, the fireflies and the sparkle.

FIX E: SOUNDS. Copy these measured characteristics
All cues are played non-positionally (Sound.Emitter.self()), except for sync rules which are unchanged. Loudness: the ascent whoosh is about 2x louder than every other cue. Remove the old "tick" cue (block.amethyst_block.hit); it was not part of the sequence.
Each cue has a list of candidate sounds (key, volume, pitch). The first is the default.

Cue A, ascent whoosh (tick 4, with the title):
- Sound: a deep airy WHOOOM. Attack 65 ms, length about 1.0s. About 52% of the energy is below 200 Hz (a ~70 Hz body) and 39% is 200-1000 Hz, with little hiss.
- Candidates: entity.wind_charge.wind_burst p0.55 v1.0, entity.breeze.whirl p0.6, entity.ender_dragon.flap p0.6, item.trident.riptide_3 p0.6, block.portal.travel p0.35 v0.35.

Cue B, short hit (tick 45, start of move 3):
- Sound: a dry "thock". About 140 ms. Energy mostly 200-1000 Hz. Abrupt cutoff, no ring or tail. Slightly right-leaning.
- Candidates: entity.wind_charge.throw p0.9 v0.8, item.mace.smash_air p1.4, entity.breeze.shoot p1.0.

Cue C, blackout swell (T0+10 ticks, ends near the reveal):
- Sound: a hard 10 ms attack with a sub boom below 200 Hz, then a sustained PITCHED tone with harmonics near 425, 851, 1276 and 2132 Hz, decaying over about 1.0s. Magical resonance, about half the loudness of A.
- Candidates: block.amethyst_block.resonate p0.7 v0.9 (plus entity.enderman.teleport p0.5 v0.4 for the boom), block.respawn_anchor.charge p0.8, block.beacon.activate p0.8, item.chorus_fruit.teleport p0.6.

Cues D and E, thuds 1 and 2 (T0+56 and T0+79):
- Sound: a "WHUMP". Fundamental about 156 Hz. Attack 40 ms, loud body about 65-115 ms, tail about 270 ms, with a faint ring near 1.9 kHz and a puff of air above 4 kHz.
- Candidates: entity.wind_charge.wind_burst p0.8, item.mace.smash_air p1.0, entity.breeze.wind_burst p0.9.

Cue F, thud 3 (T0+94): the same family but lower and boomier. Fundamental about 145 Hz, 74% of the energy in 200-1000 Hz, and a longer tail of about 370 ms. Use p0.7, and layer entity.breeze.land p0.9 v0.6.

Cue G, landing sparkle (T0+108):
- Sound: a glassy rising glitter. Length about 0.7s. 77% of the onset energy is at 1-4 kHz, with 16% above 10 kHz. Very tonal: three quick bell-like pings near 3.4k, 4.05k and 4.5k Hz over a shimmering high chord near 8.2k, 9.7k and 11.6k Hz, plus four fine crackle ticks about 0.12s apart.
- Candidates: block.amethyst_block.chime p1.9 v1.0 (plus entity.firework_rocket.twinkle p1.2 v0.7, layered), entity.experience_orb.pickup p1.6, block.note_block.chime at a high note.

Keep the soul-effect cues from the previous spec (heartbeats, soul_escape, etc.) and the sync rules (one master tick counter, sounds dispatched before visuals on the same tick, catch-up logic, prewarm, offsets).

AUDITION TOOL (required, because I cannot hear the results):
- /rtp debug sounds audition  plays each candidate for that cue in turn, 2 seconds apart, and sends a chat label "candidate 2/4: key v p".
- /rtp debug sounds pick   writes the chosen candidate into config.yml as the default and reloads.
- /rtp debug sounds list prints every cue with its default key.

ACCEPTANCE TESTS
- Blackout: the screen goes fully black at T0, and the red eye icon appears. At T0+40 it snaps to normal sky and terrain streams in. The icon keeps counting until landing and then disappears.
- Test with the camera as a marker ArmorStand, and confirm the old ItemDisplay version fails.
- Landing: HUD, chat line, title fade-in, sparkle and fireflies all appear on the same frame, with giant near-camera firefly blocks for a couple of frames, then small drifting white squares for 2+ seconds, with no bush block.
- The sounds match the descriptions above by ear, using the audition tool.
Kodari AI
KodariOct 29 at 11:13 am 4
  1. Fix the camera and blindness behavior, including the timed reveal and recovery checks.

  2. Align camera movement, titles, and descent timing with the measured sequence.

  3. Implement the exact landing handoff, HUD/chat/title, and firefly effects.

  4. Update sound cues while preserving existing soul effects and synchronization.

  5. Add /rtp debug blindness and the sound audition/list/pick tools.

  1. Camera/blindness core: the Java camera is now a marker ArmorStand; blackout applies shown-icon blindness to the player and camera, checks it during the black phase, and relocates/clears the camera effect at reveal.relocate-tick (default 40). Next: align the cinematic keyframes and titles to the measured timings.

  1. Camera timing: ascent now tops out at +80, descent follows the requested heights/ticks, and movement keyframes use absolute progress at the configurable 2-tick interval. Next: make landing a single ordered handoff and replace the existing particle rings with the requested firefly burst.

  1. Landing now clears player blindness before ending spectating, restores the player at the final camera rotation, and emits only the configured firefly burst at eye level (plus an optional second wave). Next: inspect and update the sound timeline without dropping any existing cues or timing behavior.

  1. Sound timeline: replaced the old cue timing with the measured ascent, blackout, drop, and landing cues; added selectable sound candidates, non-positional playback, a zero-volume prewarm, and configurable tick offsets. The project had no existing heartbeat or soul_escape cues to preserve. Next: add the blindness and sound-debug commands.

  1. Added /rtp debug blindness, plus sound-cue listing, 2-second candidate audition, and persisted candidate selection with config reload. I’m finishing the blackout overlay mode specified in the attached request.

Implemented the RTP changes across the camera, timeline, landing effects, sounds, and debug commands.

  • The Java camera is now an invisible marker ArmorStand. Blackout blindness is force-applied to both the player and camera, checked every five ticks, and removed from the camera at the configurable reveal tick (reveal.relocate-tick, default 40).

  • Camera movement now sends keyframes at the configured interval (default 2 ticks). The ascent tops out at +80; descent and title timings follow the requested sequence.

  • Landing clears blindness before stopping spectating, restores the player at the final camera rotation, and spawns 60 FIREFLY particles at eye level, with an optional 20-particle second wave after 8 ticks. The old rings and extra particles are removed.

  • Added the measured sound candidates and cue timing, plus sound offsets and zero-volume prewarming. Sounds play non-positionally.

  • Added /rtp debug blindness and /rtp debug sounds list|audition <cue>|pick <cue> <number>; picks are saved and reload the config.

OVERLAY and BOTH use blackout.overlay-glyph and blackout.overlay-font. Register the configured black glyph/font in Nexo, or change those config values to match your registered glyph. The project contained no existing heartbeat or soul_escape cues.

woaiini_

for some reason, everytime i do /rtp it says "an unexpected error occored tyring to exevute that command" AND in the console "[11:17:36 INFO]: zanecc_ issued server command: /rtp [11:17:36 ERROR]: Command exception: /rtp org.bukkit.command.CommandException: Cannot execute command 'rtp' in plugin Grtp v1.0.0 - plugin is disabled. at org.bukkit.command.PluginCommand.execute(PluginCommand.java:37) ~[leaf-api-26.1.2.build.3-alpha.jar:?] at io.papermc.paper.command.brigadier.bukkit.BukkitCommandNode$BukkitBrigCommand.run(BukkitCommandNode.java:83) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at com.mojang.brigadier.context.ContextChain.runExecutable(ContextChain.java:73) ~[brigadier-1.3.10.jar:?] at net.minecraft.commands.execution.tasks.ExecuteCommand.execute(ExecuteCommand.java:30) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.tasks.ExecuteCommand.execute(ExecuteCommand.java:13) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.UnboundEntryAction.lambda$bind$0(UnboundEntryAction.java:8) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.CommandQueueEntry.execute(CommandQueueEntry.java:5) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.ExecutionContext.runCommandQueue(ExecutionContext.java:104) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.executeCommandInContext(Commands.java:454) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.performCommand(Commands.java:385) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.performCommand(Commands.java:373) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.network.ServerGamePacketListenerImpl.performUnsignedChatCommand(ServerGamePacketListenerImpl.java:2519) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.network.ServerGamePacketListenerImpl.lambda$handleChatCommand$0(ServerGamePacketListenerImpl.java:2492) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.TickTask.run(TickTask.java:18) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.BlockableEventLoop.doRunTask(BlockableEventLoop.java:207) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.ReentrantBlockableEventLoop.doRunTask(ReentrantBlockableEventLoop.java:24) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.doRunTask(MinecraftServer.java:1661) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.doRunTask(MinecraftServer.java:194) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.BlockableEventLoop.pollTask(BlockableEventLoop.java:182) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.pollTaskInternal(MinecraftServer.java:1641) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.pollTask(MinecraftServer.java:1635) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.recordTaskExecutionTimeWhileWaiting(MinecraftServer.java:1335) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.runServer(MinecraftServer.java:1479) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.lambda$spin$0(MinecraftServer.java:304) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at java.base/java.lang.Thread.run(Thread.java:1474) ~[?:?]" this , please fix this problem, thankyou!

Kodari AI
KodariOct 29 at 11:21 am 1

Plan:

  1. Check the startup validation and bundled default config.

  2. Fix the missing default setting so the plugin enables and registers /rtp.

/rtp fails because the plugin disables itself during startup: its config validation requires blackout.whoosh-delay-ticks, but that setting is missing from the default config and isn’t used elsewhere. I removed that unnecessary validation check.

Compile the updated plugin, replace the server’s existing jar, and restart the server. /rtp should then be registered when the plugin enables.

woaiini_

can you fix the sounds effects, for some reason i can hear the first going off sound and the landing sound could you fix it so i can hear all the other sounds i assigned you to do, and like for the landing effect intead of the firefly effect its the end rod white sparkle effect

Kodari AI
KodariOct 29 at 12:23 pm 2
  1. Trace and fix the RTP sound sequence so all configured sounds play.

  2. Change the landing particles to the white end-rod sparkle effect.

Updated the RTP sound sequence so ascent and descent cues play when their camera stages begin, including when an existing server config still has empty sounds lists. Replaced the landing fireflies with white end-rod sparkles.

Compile the project, replace the server’s current jar with the updated one, and restart the server for the changes to take effect.

woaiini_

Fix the sound bug and finish the sound and firefly work in Grtp. Everything else from the previous spec stays unless replaced here.

BUG: SOME SOUNDS CANNOT BE HEARD (only the take-off and landing cues play) Cause: the previous spec told you to play cues with Sound.Emitter.self(). That attaches each sound to the PLAYER entity. While the player is spectating the camera ArmorStand, the client keeps the player entity at its last explicitly teleported position. The camera, and the sound listener, are at the camera entity, which ends up 30-80+ blocks away. Minecraft's default sound range is 16 blocks, so a sound attached to the stale player entity is silent. Take-off is heard because the camera has barely moved. Landing is heard because the player is back at the camera.

Required fix:

  1. Play EVERY cue (core cues, extras, and prewarm) as a POSITIONAL sound at the camera's current coordinates, for example player.playSound(Sound.sound(Key.key(key), Sound.Source.MASTER, volume, pitch), cam.getX(), cam.getY(), cam.getZ()), or the Bukkit overload player.playSound(camLocation, key, SoundCategory.MASTER, volume, pitch). The distance to the listener is then 0, so cues play at full volume anywhere along the path.
  2. Remove every use of Sound.Emitter.self(), entity emitters, and the no-position playSound(Sound) from the cinematic code. Before the camera exists (ticks 0-1) use the player's location. After relocation use the destination camera coordinates. On landing use the player's final eye location.
  3. Read the camera location when the cue FIRES, never when it is scheduled. Store "camera" in the event, not coordinates.
  4. Keep the sync rules: one master tick counter, sounds dispatched first in the tick (before titles, particles and camera teleports), server thread only, catch-up logic unchanged.
  5. /rtp debug sounds audit prints, for every cue: tick, emission method, emission coordinates, camera coordinates and the distance between them (must be under 1 block). It fails loudly if any cue uses an entity emitter.
  6. /rtp debug sounds run plays the real camera path with only the 7 core cues (extras off), so each one can be checked by ear.

THE COMPLETE REFERENCE AUDIO (7 core cues; the reference has no other sounds, and silence everywhere else) Pitches are identical in every recording, so these are fixed samples: do NOT randomize pitch. Each cue has a default key and alternates. The audition tool from the previous spec (/rtp debug sounds audition and pick) covers all of them.

Cue A. Tick 4, with the first title and the start of move 1.

  • Sound: a very deep airy WHOOOM, about 1.0s. Soft swelling attack. About 89% of the energy is below 200 Hz, with a ~67 Hz body and faint mid partials. Centered.
  • Volume 1.0. Default entity.wind_charge.wind_burst p0.55 (+ entity.breeze.whirl v0.6 p0.6). Alternates: entity.ender_dragon.flap p0.6, item.trident.riptide_3 p0.6, block.portal.travel p0.35.

Cue B. Tick 45, the start of move 3 (the sound after the second pause). NOTE: there is NO sound at move 2.

  • Sound: a dry "thock", 140 ms. Energy mostly 200-1000 Hz, a fundamental near 460 Hz, a hard cutoff and no tail.
  • Volume 1.0. Default entity.wind_charge.throw p0.9. Alternates: item.mace.smash_air p1.4, entity.breeze.shoot.

Cue C. Tick 94 (T0+10). The "destination found" swell.

  • Sound: 1.0 to 1.6s, with a sub boom (100-135 Hz) at onset, then pitched partials near 404, 657, 1023, 1211 and 2008 Hz decaying slowly. About 20 dB down at 1.45s. Magical resonance.
  • Volume 0.8. Default block.amethyst_block.resonate p0.7 (+ entity.enderman.teleport v0.4 p0.5 for the boom). Alternates: block.respawn_anchor.charge p0.8, block.beacon.activate p0.8, item.chorus_fruit.teleport p0.6.

Cue D. Tick 140 (T0+56), thud 1.

  • Sound: a WHUMP. 40 ms attack, fundamental about 156-167 Hz with partials near 393, 565 and 1900 Hz, about 20 dB down at 85-100 ms, tail 250-350 ms.
  • Volume 1.0. Default entity.wind_charge.wind_burst p0.8. Alternates: item.mace.smash_air p1.0, entity.breeze.wind_burst p0.9.

Cue E. Tick 163 (T0+79), thud 2. Same as D.

Cue F. Tick 178 (T0+94), thud 3.

  • Same family as D but a longer body (about 20 dB down at 185 ms, tail about 420 ms).
  • Volume 0.85. Default entity.wind_charge.wind_burst p0.7 (+ entity.breeze.land v0.6 p0.9).

Cue G. Tick 192 (T0+108), landing sparkle, the same tick as the HUD return and the firefly burst.

  • Sound: a glassy glitter, 0.5-0.7s, 5 ms attack. Fixed partials near 3402, 4054, 4479, 8156 and 9717 Hz, plus fine crackle ticks.
  • Volume 0.7. Default block.amethyst_block.chime p1.9 (+ entity.firework_rocket.twinkle v0.7 p1.2). Alternates: entity.experience_orb.pickup p1.6, a high block.note_block.chime.

Soul extras (heartbeats, soul_escape and so on) stay available behind sounds.extras (default true), at volume 0.5 or less, using the SAME positional routine. They must never mask a core cue. Remove the old "A2" and "tick" cues: they are not in the reference.

FIX: FIREFLY BURST AT LANDING (research-based) Facts from Paper's docs: with count = 0 the client spawns exactly ONE particle at the exact location. With count > 0 it applies gaussian offsets and multiplies velocity by "extra". The FIREFLY particle uses the Y offset as its initial vertical speed, with a 50% chance the sign is flipped. The old setting (offset Y 0.7) made fireflies shoot up or down and vanish almost instantly.

Required implementation:

  1. Loop 50-60 times. Each iteration picks a location = the player's final eye location + a gaussian jitter (about 0.6 blocks in x and z, 0.4 in y), then calls player.spawnParticle(Particle.FIREFLY, loc, 0, 0.0, yVel, 0.0, 1.0) with count 0 and yVel randomly between 0.0 and 0.05.
  2. Timing: do NOT spawn on the handoff tick. Spawn 1 tick AFTER the teleport (landing.particle-delay-ticks, default 1) so the client already has the new position (the client drops particles farther than 32 blocks from its camera). Optional second wave of 15-20 particles 5 ticks later (landing.second-wave).
  3. Expected look: small white or pale-yellow squares in daylight (yellow-green glow at night), 30-40 visible at once, a few huge ones right at the camera for a couple of frames, drifting slowly for 2+ seconds. No bush block, no sendBlockChange, no flash.
  4. Bedrock: Geyser may not render FIREFLY, so use a configurable fallback (END_ROD) for Bedrock players.
  5. /rtp debug fireflies spawns the same burst 3 blocks in front of the sender and prints the count, the delay and the particle name. If nothing appears, the in-game Video Settings, Particles option must be set to All (Decreased or Minimal drops most particles).

ACCEPTANCE TESTS

  • A normal /rtp: all 7 core cues (A-G) are clearly audible, including B after the second pause and C when "DESTINATION FOUND!" appears, with extras on and with extras off.
  • /rtp debug sounds audit shows 0 entity-emitter cues and a camera-to-emission distance under 1 block for all cues.
  • The landing shows the sparkle sound, HUD, title and a visible firefly burst on the first frames after the pop. /rtp debug fireflies shows the same burst.
  • Test on Java and Bedrock, and test once with the server lagging.
Kodari AI
KodariOct 30 at 1:38 am 3
  1. Update every cinematic sound cue to emit positionally from the camera when it fires, while preserving the tick order and catch-up behavior.

  2. Implement the 7-cue core sequence, positional extras, and sound audit/run debug modes.

  3. Add the delayed landing firefly burst, configurable Bedrock fallback, and /rtp debug fireflies.

Fixed the cinematic sound playback: every cue now plays positionally at the camera’s current location, and the seven core cues use the requested timing and fixed pitches. Existing configs update the core sound levels once while preserving their selected alternate sounds.

The landing burst now uses delayed FIREFLY particles, with a configurable END_ROD fallback for Bedrock and an optional second wave. Added /rtp debug sounds audit, /rtp debug sounds run, and /rtp debug fireflies (admin permission required). The sound audit and run commands start an actual RTP camera sequence.

Compile the updated project, then replace the server’s jar and restart to apply the changes.

woaiini_

Fix the sounds in Grtp and change the landing effect. Do NOT add any new commands, options or features. Remove every /rtp debug subcommand and any audit, audition or pick tooling. Remove the sound prewarm, the "skip sounds that are late" logic, global-offset, the soul extras and the A2 and tick cues. Everything else stays as it is. and make sure to optimize and not just code it recklessly

SOUND PLAYBACK (make it simple and unbreakable)

  1. Play every cue with this one call and nothing else:

Location at = (camera != null && camera.isValid()) ? camera.getLocation() : player.getLocation(); player.playSound(at, key, SoundCategory.MASTER, volume, pitch); key is a full string like "minecraft:entity.wind_charge.wind_burst". Do NOT use Sound.Emitter.self(), entity emitters, or playSound(Sound) without a position. They attach the sound to the stale player entity while spectating, so it is silent when the camera is far away.

  1. Each cue fires exactly on its tick, in the master tick loop, before the title and camera teleport of that tick. No delayed tasks, no skipping, no catch-up dropping. If a tick is late, still play the cue.
  2. Wrap each cue in its own try/catch. One failing cue must never stop the others or the sequence. On exception, log the full stack trace to the console. Log one console INFO line per fired cue: tick, key, x y z, volume, pitch.
  3. Every cue plays at volume 1.0 unless a lower value is listed (the camera is at distance 0, so it is fully audible). Pitch must stay within 0.5 to 2.0. Do not randomize pitch.
  4. Every sound key must be exactly as written below (all of these exist in 1.21.11). Config.yml lists each cue with key, volume and pitch so it can be edited, and /rtp reload applies changes.

THE 7 REFERENCE SOUNDS (this is the whole sound design, nothing else) Cue A. Tick 4, with the first title (take-off). A very deep airy WHOOOM, about 1.0s. minecraft:entity.wind_charge.wind_burst v1.0 p0.55 minecraft:entity.breeze.whirl v0.6 p0.6 Cue B. Tick 45, the start of move 3 (right after the second pause). A dry short "thock", about 140 ms. minecraft:entity.wind_charge.throw v1.0 p0.9 Cue C. Tick 94 (T0+10), when "DESTINATION FOUND!" is up. A 1.0 to 1.6s resonant swell with a low boom. minecraft:block.amethyst_block.resonate v1.0 p0.7 minecraft:entity.enderman.teleport v0.5 p0.5 Cue D. Tick 140 (T0+56), thud 1. A "whump", about 150 Hz. minecraft:entity.wind_charge.wind_burst v1.0 p0.8 Cue E. Tick 163 (T0+79), thud 2. Same as D. minecraft:entity.wind_charge.wind_burst v1.0 p0.8 Cue F. Tick 178 (T0+94), thud 3. Lower and boomier. minecraft:entity.wind_charge.wind_burst v1.0 p0.7 minecraft:entity.breeze.land v0.7 p0.9 Cue G. Tick 192 (T0+108), the landing sparkle, on the SAME tick as the HUD return, title and sparkle particles. A bright glassy glitter, about 0.6s. minecraft:block.amethyst_block.chime v1.0 p1.9 minecraft:entity.firework_rocket.twinkle v0.7 p1.2 There is NO sound at move 2, none at the blackout itself, and none during the top hold.

If a cue has two lines, both play on the same tick.

LANDING EFFECT: replace the firefly burst with END_ROD sparkles

  • Remove all FIREFLY particles, any firefly fallback, and /rtp debug fireflies.
  • One tick AFTER the landing teleport (never on the same tick or before it, because the client drops particles it receives before it has the new position), spawn:

player.spawnParticle(Particle.END_ROD, player.getEyeLocation(), 60, 0.9, 0.7, 0.9, 0.03); Also spawn the same burst with world.spawnParticle for nearby players.

  • 4 ticks later spawn a second wave of 25: spawnParticle(Particle.END_ROD, player.getEyeLocation(), 25, 0.7, 0.5, 0.7, 0.04).
  • Result: white sparkles that burst out around the player and drift for 2+ seconds. No bush block, no screen flash.
  • Keep the HUD return, the chat line and the title on the landing tick exactly as before.
  • END_ROD works for Bedrock players too, so no fallback is needed.

CHECK BEFORE DELIVERING

  • Search the code for Emitter, playSound( with only a Sound argument, FIREFLY and "debug". None may remain in the cinematic code path.
  • Confirm in the console log that cues A through G each log once per /rtp run, at the ticks above.
Kodari AI
KodariOct 30 at 1:51 am 6
  1. Simplify the cue scheduler and remove sound/debug tooling, keeping only the specified seven cues.

  2. Replace the landing fireflies with the two delayed END_ROD waves, then check the cinematic code for forbidden playback/debug patterns.

  • Replaced the sound scheduler with exact phase ticks for cues A–G and positional playSound(Location, key, MASTER, volume, pitch) calls. Each sound is isolated by its own exception handler and logs its tick, key, coordinates, volume, and pitch. Removed debug commands/tooling, prewarm, offsets, candidates, and obsolete cues.

  • Replaced the landing effect with END_ROD waves at +1 and +5 ticks. The player receives each wave directly; nearby players receive it through the world particle API.

  • Static scan found no emitters, unpositioned sound calls, FIREFLY, debug tooling, prewarm/offset settings, or soul/A2/tick cues. Runtime audio and client visibility still need in-game verification.

woaiini_

The compilation failed with this error:

code
Compilation failed with 1 error(s):

ERROR in src/main/java/com/kodari/cinematicrtp/RtpManager.java at line 367: no suitable method found for spawnParticle(Particle,Location,int,double,double,double,double,<null>,boolean,Player[])
                eye.getWorld().spawnParticle(particle.get(), eye, count, offsetX, offsetY, offsetZ, extra,
                              ^


=== COMPILATION ERROR ANALYSIS ===

FILES TO INVESTIGATE:
  - src/main/java/com/kodari/cinematicrtp/RtpManager.java

Please fix this error by creating a new artifact with the corrected code.

Kodari AI
KodariOct 30 at 1:54 am 1

Plan: keep the nearby-player filter and send the burst directly to each viewer, avoiding the unsupported World.spawnParticle overload.

Fixed the compilation error by sending the particle burst to each nearby viewer with the supported Player.spawnParticle overload. The landing player still receives the burst directly.

woaiini_

make the sound effects match wit the cameras and pauses and make it smoother

Kodari AI
KodariOct 30 at 2:03 am 1

I’ll keep the reference cue timings for the current camera sequence, but derive movement cues from the configured stage starts so they stay synchronized if those timings are adjusted. I’ll also set camera updates to every tick for smoother motion.

Aligned the cues to the configured camera timeline: A follows the take-off title, B follows move 3, and D–G track the descent stages and landing. With the current settings, cues still fire at ticks 4, 45, 10, 56, 79, 94, and 108 respectively. Camera updates now run every tick for smoother movement.

woaiini_

chnage the second audio from arrow to wind charge sound

Kodari AI
KodariOct 30 at 2:09 am 1

Cue B (the second audio) is already configured as minecraft:entity.wind_charge.throw at volume 1.0 and pitch 0.9; there are no arrow sound keys in the project, so no code change was needed.

woaiini_

Update Grtp. Change ONLY what is listed here: the sounds, the timeline ticks, the title durations. Do NOT add commands, debug tools, extras or options. The END_ROD landing, blindness and camera work stay exactly as they are. Remove any leftover /rtp debug subcommands, sound prewarm, skip-late-sound logic and soul-extra sounds.

  1. SOUND PLAYBACK (this is why sounds were silent)
  • Play every cue with exactly this call:

Location at = (camera != null && camera.isValid()) ? camera.getLocation() : player.getLocation(); player.playSound(at, key, SoundCategory.MASTER, 4.0f, pitch);

  • Volume 4.0 on purpose. Minecraft caps loudness at 1.0 but extends the audible range to 16 x volume (64 blocks), so a sound is never lost if the camera and the client's own player position are far apart. Set it once in config as sounds.volume (default 4.0).
  • NEVER use Sound.Emitter.self(), entity emitters, or playSound(Sound) without a position.
  • Each cue fires on its exact tick, inside the master tick loop, before that tick's title and camera teleport. No delayed tasks, no skipping, no catch-up dropping.
  • Wrap each cue in its own try/catch. One failing cue must never stop the rest. Log full stack traces to the console, plus one console line per cue fired: tick, key, x y z, pitch.
  • Keys are full strings such as "minecraft:entity.wind_charge.wind_burst". Pitch stays between 0.5 and 2.0, and is never randomized (the reference plays fixed pitches).
  1. ALIGNED TIMELINE (measured with audio and video aligned; tick 0 = start of move 1; 20 ticks per second; T0 = tick 84 = blackout)
  • tick 0: MOVE 1 starts (10 ticks)
  • tick 4: title "FINDING A GOOD LOCATION..." appears, with CUE A
  • ticks 10-20: hold (still)
  • tick 20: MOVE 2 starts (10 ticks). CUE A2 plays at tick 21.
  • ticks 30-42: hold (still)
  • tick 42: MOVE 3 starts (15 ticks, ease-out). CUE B plays at tick 43.
  • ticks 57-84: top hold (26 ticks, still, no text)
  • T0 (tick 84): blackout. Title "DESTINATION FOUND!" appears at T0+2.
  • T0+9: CUE C
  • T0+40: vision starts returning
  • T0+57: CUE D (thud 1)
  • T0+63: DROP 1 (8 ticks)
  • T0+79: DROP 2 (10 ticks), with CUE E on the same tick
  • T0+95: CUE F (thud 3)
  • T0+96: DROP 3 (7 ticks), then a 3-tick settle ending at T0+110
  • T0+110: LANDING. HUD, chat line, title and CUE G on the same tick. The END_ROD burst follows one tick later (unchanged).

Moves 1 and 2 use easeInOut; move 3 and drop 3 use easeOut. Heights and pitches stay as before.

No sound plays at takeover, during holds, at the reveal, or at title fades.

Title durations (ticks): "FINDING A GOOD LOCATION...": fadeIn 6, stay 21, fadeOut 10. "DESTINATION FOUND!": fadeIn 6, stay 60, fadeOut 10. "FOUND YOU THE PERFECT LOCATION!": fadeIn 6, stay 26, fadeOut 10.

  1. THE 8 SOUNDS (copied from the reference; all keys and pitches are config values)

CUE A (tick 4). A deep swelling WHOOOM, about 0.8s. It rises over about 0.3s, then rumbles and fades. Almost all energy below 200 Hz (body near 67 Hz). minecraft:entity.wind_charge.wind_burst p0.55 minecraft:entity.breeze.whirl p0.6 CUE A2 (tick 21, the start of move 2; this is the sound after the first pause). A short deep "whump", about 0.25s, with a faint ring near 2 kHz. Same family as the thuds. minecraft:entity.wind_charge.wind_burst p0.9 CUE B (tick 43, the start of move 3; the sound after the second pause). A dry "thock", about 140 ms, no tail, hard cutoff, energy 200-1000 Hz. minecraft:entity.wind_charge.throw p0.9 CUE C (T0+9). A long resonant swell, 1.0 to 1.6s. It rises in about 0.15s, holds loud for about 0.9s, then fades. Pitched partials near 404, 657, 1023, 1211 and 2008 Hz with a fast flutter (about 20 Hz), plus a low boom (100-135 Hz) at the start. minecraft:block.amethyst_block.resonate p0.7 minecraft:entity.breeze.whirl p0.8 minecraft:entity.enderman.teleport p0.5 CUE D (T0+57), CUE E (T0+79), CUE F (T0+95). A "whump" each: 40 ms attack, fundamental about 156-167 Hz, partials near 393, 565 and 1900 Hz, tail 250-350 ms. F is longer and boomier (tail about 420 ms).

D and E: minecraft:entity.wind_charge.wind_burst p0.8 F: minecraft:entity.wind_charge.wind_burst p0.7 and minecraft:entity.breeze.land p0.9 CUE G (T0+110). A glassy three-note rising glitter, about 0.6s: about 3.4 kHz first, then about 8.2 kHz, then about 9.7 kHz, with partials near 4.05k and 4.5k Hz. minecraft:block.amethyst_block.chime p1.9 minecraft:entity.firework_rocket.twinkle p1.2 Cues with two or three lines play every line on the same tick. In the reference, A, A2 and B sit slightly right of center and the rest are centered; playing them centered is fine.

  1. CHECK BEFORE DELIVERING
  • Search the code for Emitter, playSound( with a Sound argument only, prewarm, FIREFLY and "debug". None may remain in the cinematic code path.
  • The console log must show cues A, A2, B, C, D, E, F, G exactly once per /rtp run, at the ticks above.
Kodari AI
KodariOct 31 at 3:25 am 1
  1. Update the cinematic tick sequence, sound cue definitions/playback, and title timings in the existing manager/config.

  2. Remove only the specified leftover debug/prewarm/skip-late/soul-extra code, then scan the cinematic path for forbidden patterns.

Updated Grtp’s timeline and sounds:

  • Cue ticks are now A: 4, A2: 21, B: 43, then C–G at T0+9, +57, +79, +95, and +110. Playback uses positional MASTER sounds at the configured volume of 4.0; each cue logs one INFO line, and individual sound failures log stack traces without stopping the other sounds.

  • Updated camera stage timings and easing, landing at T0+110, and set the requested title durations. The destination title now appears at T0+2.

  • Left the END_ROD landing effect, blindness, and camera behavior unchanged. Static scan found no emitter calls, unpositioned sound calls, prewarm, FIREFLY, debug, or late-sound logic in the source/resources. Runtime cue logs were not verified in-game.

woaiini_

fix this problem "[03:29:46 ERROR]: Command exception: /rtp org.bukkit.command.CommandException: Cannot execute command 'rtp' in plugin Grtp v1.0.0 - plugin is disabled. at org.bukkit.command.PluginCommand.execute(PluginCommand.java:37) ~[leaf-api-26.1.2.build.3-alpha.jar:?] at io.papermc.paper.command.brigadier.bukkit.BukkitCommandNode$BukkitBrigCommand.run(BukkitCommandNode.java:83) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at com.mojang.brigadier.context.ContextChain.runExecutable(ContextChain.java:73) ~[brigadier-1.3.10.jar:?] at net.minecraft.commands.execution.tasks.ExecuteCommand.execute(ExecuteCommand.java:30) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.tasks.ExecuteCommand.execute(ExecuteCommand.java:13) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.UnboundEntryAction.lambda$bind$0(UnboundEntryAction.java:8) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.CommandQueueEntry.execute(CommandQueueEntry.java:5) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.execution.ExecutionContext.runCommandQueue(ExecutionContext.java:104) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.executeCommandInContext(Commands.java:454) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.performCommand(Commands.java:385) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.commands.Commands.performCommand(Commands.java:373) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.network.ServerGamePacketListenerImpl.performUnsignedChatCommand(ServerGamePacketListenerImpl.java:2519) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.network.ServerGamePacketListenerImpl.lambda$handleChatCommand$0(ServerGamePacketListenerImpl.java:2492) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.TickTask.run(TickTask.java:18) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.BlockableEventLoop.doRunTask(BlockableEventLoop.java:207) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.ReentrantBlockableEventLoop.doRunTask(ReentrantBlockableEventLoop.java:24) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.doRunTask(MinecraftServer.java:1661) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.doRunTask(MinecraftServer.java:194) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.util.thread.BlockableEventLoop.pollTask(BlockableEventLoop.java:182) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.pollTaskInternal(MinecraftServer.java:1641) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.pollTask(MinecraftServer.java:1635) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.recordTaskExecutionTimeWhileWaiting(MinecraftServer.java:1335) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.runServer(MinecraftServer.java:1479) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at net.minecraft.server.MinecraftServer.lambda$spin$0(MinecraftServer.java:304) ~[leaf-26.1.2.jar:26.1.2-3-3c591d7] at java.base/java.lang.Thread.run(Thread.java:1474) ~[?:?] "

Kodari AI
KodariOct 31 at 3:31 am 1

Root cause: config.yml uses ease-in-out for the first two camera stages, but startup validation rejects it and disables Grtp. The camera interpolation already supports that easing; I’ll align validation with the existing implementation.

Fixed the startup validation mismatch: Grtp’s config uses ease-in-out, and the camera code already supports it, but validation rejected it and disabled the plugin. Validation now accepts that easing, so the plugin can enable with the current camera settings.

woaiini_

can you optimize it so it wont show allot of meessgae like this inthe chat "[08:02:39 INFO]: [Grtp] RTP sound cue=A tick=4 key=minecraft:entity.wind_charge.wind_burst,minecraft:entity.breeze.whirl x=236.5288606465998 y=75.99808000373841 z=314.19114939090696 volume=4.0 pitch=0.55,0.60 [08:02:40 INFO]: [Grtp] RTP sound cue=A2 tick=21 key=minecraft:entity.wind_charge.wind_burst x=236.5288606465998 y=81.0 z=314.19114939090696 volume=4.0 pitch=0.90 [08:02:41 INFO]: [Grtp] RTP sound cue=B tick=43 key=minecraft:entity.wind_charge.throw x=236.5288606465998 y=108.0 z=314.19114939090696 volume=4.0 pitch=0.90 [08:02:43 INFO]: [Grtp] RTP sound cue=C tick=9 key=minecraft:block.amethyst_block.resonate,minecraft:entity.breeze.whirl,minecraft:entity.enderman.teleport x=236.5288606465998 y=153.0 z=314.19114939090696 volume=4.0 pitch=0.70,0.80,0.50 [08:02:46 INFO]: [Grtp] RTP sound cue=D tick=57 key=minecraft:entity.wind_charge.wind_burst x=-547.5 y=162.0 z=3817.5 volume=4.0 pitch=0.80 [08:02:47 INFO]: [Grtp] RTP sound cue=E tick=79 key=minecraft:entity.wind_charge.wind_burst x=-547.5 y=134.0 z=3817.5 volume=4.0 pitch=0.80 [08:02:48 INFO]: [Grtp] RTP sound cue=F tick=95 key=minecraft:entity.wind_charge.wind_burst,minecraft:entity.breeze.land x=-547.5 y=109.0 z=3817.5 volume=4.0 pitch=0.70,0.90 [08:02:48 INFO]: [Grtp] RTP sound cue=G tick=110 key=minecraft:block.amethyst_block.chime,minecraft:entity.firework_rocket.twinkle x=-547.5 y=83.62 z=3817.5 volume=4.0 pitch=1.90,1.20 [08:02:58 INFO]: zanecc_ issued server command: /rtp [08:02:59 INFO]: [Grtp] RTP sound cue=A tick=4 key=minecraft:entity.wind_charge.wind_burst,minecraft:entity.breeze.whirl x=-566.7638500273068 y=89.79064266108495 z=3806.01365559787 volume=4.0 pitch=0.55,0.60 [08:03:00 INFO]: [Grtp] RTP sound cue=A2 tick=21 key=minecraft:entity.wind_charge.wind_burst x=-566.7638500273068 y=94.79256265734654 z=3806.01365559787 volume=4.0 pitch=0.90 [08:03:01 INFO]: [Grtp] RTP sound cue=B tick=43 key=minecraft:entity.wind_charge.throw x=-566.7638500273068 y=121.79256265734654 z=3806.01365559787 volume=4.0 pitch=0.90 [08:03:07 INFO]: [Grtp] RTP sound cue=C tick=9 key=minecraft:block.amethyst_block.resonate,minecraft:entity.breeze.whirl,minecraft:entity.enderman.teleport x=-566.7638500273068 y=166.79256265734654 z=3806.01365559787 volume=4.0 pitch=0.70,0.80,0.50 [08:03:10 INFO]: [Grtp] RTP sound cue=D tick=57 key=minecraft:entity.wind_charge.wind_burst x=-398.5 y=219.0 z=-3113.5 volume=4.0 pitch=0.80 [08:03:11 INFO]: [Grtp] RTP sound cue=E tick=79 key=minecraft:entity.wind_charge.wind_burst x=-398.5 y=191.0 z=-3113.5 volume=4.0 pitch=0.80 [08:03:12 INFO]: [Grtp] RTP sound cue=F tick=95 key=minecraft:entity.wind_charge.wind_burst,minecraft:entity.breeze.land x=-398.5 y=166.0 z=-3113.5 volume=4.0 pitch=0.70,0.90 [08:03:12 INFO]: [Grtp] RTP sound cue=G tick=110 key=minecraft:block.amethyst_block.chime,minecraft:entity.firework_rocket.twinkle x=-398.5 y=140.62 z=-3113.5 volume=4.0 pitch=1.90,1.20" so it wont take much in the cpu

Kodari AI
KodariOct 31 at 8:06 am 1
  • Remove the per-cue success INFO log and its string/list formatting.

  • Keep sound playback and full error stack traces unchanged.

Removed the per-cue INFO logs and their formatting, so each /rtp run no longer prints eight sound lines to the server console. Sound playback is unchanged; failures still log full stack traces. This mainly reduces console spam—the logs were a negligible CPU cost.

woaiini_

Swap ONLY the sounds in Grtp. Do not change any tick, volume setting, title, camera, particle or anything else. Do not add commands, options or extras.

The resource pack grtp_sounds.zip (installed through Nexo) provides 8 custom sounds copied from the reference. In config.yml, replace the sound key of each cue with its custom key and play exactly ONE sound per cue (remove the layered vanilla lines), at pitch 1.0: cue A -> grtp:cue_a cue A2 -> grtp:cue_a2 cue B -> grtp:cue_b cue C -> grtp:cue_c cue D -> grtp:cue_d cue E -> grtp:cue_e cue F -> grtp:cue_f cue G -> grtp:cue_g

Keep the existing playback call and the existing ticks exactly as they are now (cue A tick 4, A2 tick 21, B tick 43, C at T0+9, D at T0+57, E at T0+79, F at T0+95, G at T0+110, with tick 0 = start of move 1 and T0 = tick 84).

Bedrock players cannot hear custom Java sounds, so for Bedrock players keep playing the current vanilla keys.

Kodari AI
KodariNov 1 at 5:50 am 1
  1. Replace each configured cue with its matching custom key at pitch 1.0.

  2. Keep cue timing and playback unchanged, with one vanilla fallback sound per cue for Bedrock players.

Updated only the sound configuration and Bedrock sound selection. Java players get one grtp:cue_* sound per cue at pitch 1.0; Bedrock players get one existing vanilla sound per cue at pitch 1.0. The playback call and cue timings are unchanged.

woaiini_

separate the sound for simple and cinematic

📎 1 file 5,010 chars
📄
pasted-code-1793534784424.txt
txt 39 lines
▶
Add a per-player "cinematic camera" setting to Grtp, plus a simple (non-cinematic) mode. Do not change the existing cinematic sequence, its sounds, ticks or titles.

1. SETTING
- Each player has a persistent boolean cinematicEnabled, saved by UUID in a data file (data.yml) and cached in memory, saved on change and on disable. Default comes from config cinematic.default-enabled (true).
- At /rtp start choose the mode: if the player is Bedrock (Floodgate/Geyser) OR the world has a ceiling (Nether) OR cinematicEnabled is false, use SIMPLE mode. Otherwise use CINEMATIC (the existing sequence).
- Bedrock players ALWAYS get SIMPLE mode, even if their setting is on or they toggle it. Their stored value is kept but ignored.

2. HIDDEN COMMAND (for my own /settings plugin and for players who know it)
- /rtpcinematic  [player]
- Usable by every player on themselves with no permission. Targeting another player needs grtp.admin, or the console.
- It must be invisible: not shown in tab completion, not in the client's command tree, and not in /help. Implement it by registering the command normally (so Bukkit.dispatchCommand from my other plugin works) and then removing "rtpcinematic" and "grtp:rtpcinematic" from PlayerCommandSendEvent's command list for everyone, filtering it out of AsyncTabCompleteEvent, and not giving it a description or usage text.
- Messages (configurable, MiniMessage): cinematic-on, cinematic-off, cinematic-status, and for Bedrock players cinematic-bedrock ("Cinematic mode isn't available on Bedrock.").
- Also expose a Java API through Bukkit's ServicesManager (interface GrtpApi): isCinematicEnabled(UUID), setCinematicEnabled(UUID, boolean), isEffectiveCinematic(Player) (applies the Bedrock and Nether rules). If PlaceholderAPI is installed, add %grtp_cinematic% returning "on" or "off" (always "off" for Bedrock).

3. SIMPLE MODE (copied from the reference)
- Config warmup.seconds = 3, warmup.cancel-on-move = true.
- At /rtp start: validate as usual, start the async location search, and keep the player in their normal state (no spectator, no camera, no blindness, no body double).
- Warmup runs on the master tick counter. At ticks 0, 20 and 40 show the title and subtitle, then play the sound and update the particles on the SAME tick:
  Title: "DON'T MOVE!" in the pink title style (same title-style, gradient and font settings as the other titles), fadeIn 0, stay 20, fadeOut 0.
  Subtitle: "WAIT %seconds% SECONDS!" in white with only the number in pink; %seconds% is 3, then 2, then 1.
- Sound: play grtp:warmup once per second at those ticks, using the same playback call as the cinematic sounds (positional at the player's location, volume 4.0, pitch 1.0, SoundCategory.MASTER). For Bedrock players, or when sounds.mode is VANILLA, use minecraft:block.respawn_anchor.charge v0.6 p1.0 instead.
- Particles: every tick during the warmup spawn Particle.ENCHANT around the player's head with player.spawnParticle(Particle.ENCHANT, player.getEyeLocation(), count, 1.2, 0.8, 1.2, 0.8). Use count 6 per tick during the "3" second, 12 during the "2" second, and 20 during the "1" second, so the glyphs get denser. Tune so the grey runes visibly stream around the camera at a distance of one to two blocks.
- Cancel if the player moves more than 0.3 blocks from the start position (or takes damage, config warmup.cancel-on-damage = true): clear the title, call stopSound on grtp:warmup, send message warmup-cancelled, and do not apply cooldown or cost.
- At tick 60: if a safe location is ready, teleport the player instantly (reuse the existing safe-location and underground-fix logic), clear the title, and send the usual chat line "Teleported to %x%, %z% in %world%". No sound, no title, no particles on arrival.
- If the search is not ready at tick 60, keep the last title and change the subtitle to "FINDING A LOCATION..." until it is found (timeout 10s; on failure send an error, return nothing, and apply no cooldown or cost).
- Cooldown, cost, radius, world permissions and reload behave exactly as in cinematic mode.

4. CONFIG AND MESSAGES (new keys, with defaults)
cinematic.default-enabled: true
warmup.seconds: 3
warmup.cancel-on-move: true
warmup.cancel-on-damage: true
messages: warmup-title "DON'T MOVE!", warmup-subtitle "WAIT <#ff5fd2>%seconds% SECONDS!", warmup-cancelled, warmup-searching "FINDING A LOCATION...", cinematic-on, cinematic-off, cinematic-status, cinematic-bedrock.
Update the resource pack note: grtp_sounds.zip now also contains grtp:warmup.

5. CHECK BEFORE DELIVERING
- Normal player with the setting on gets the existing cinematic. With it off, they get the simple warmup. Bedrock always gets the simple warmup.
- /rtpcinematic never appears in tab completion or /help for a normal player, but works when typed, and also through Bukkit.dispatchCommand from another plugin and from the console with a player name.
- The setting survives a restart.
Kodari AI
KodariNov 1 at 12:17 pm 3
  1. Trace RTP startup, sound playback, config/messages, and existing Bedrock hooks.

  2. Add the persistent cinematic toggle, hidden command/API, and optional placeholder integration.

  3. Add the simple warmup mode while preserving the cinematic sequence, then verify config and event wiring.

Added separate sound handling for simple mode: Java players hear grtp:warmup; Bedrock players and sounds.mode: VANILLA use the vanilla fallback. The cinematic cue sounds and timing remain unchanged.

Simple mode now runs the configurable warmup, cancels on movement or damage, and teleports without cinematic arrival effects. Added persistent per-player settings, the hidden /rtpcinematic command, the GrtpApi service, and optional %grtp_cinematic% support for PlaceholderAPI.

woaiini_
📎 1 file 2,405 chars
📄
pasted-code-1793614426262.txt
txt 21 lines
▶
Rewrite Grtp SIMPLE mode as an exact copy of the reference video. Replace the earlier simple-mode particle and timing numbers. Keep everything else as it is: the cancel rules, the safe-location logic, cooldown and cost, the hidden /rtpcinematic setting, and Bedrock always using SIMPLE mode.

TIMELINE (ticks from the start of the warmup, 20 per second)
- tick 0: title "TELEPORTING!", subtitle "Wait 3 seconds", the sound grtp:warmup starts, and the particles start. All on the SAME tick.
- tick 20: title re-sent, subtitle number becomes 2.
- tick 40: title re-sent, subtitle number becomes 1.
- tick 60: teleport the player and clear the title on the same tick. Particles stop here.
- The sound is played ONCE at tick 0 and is NOT cut at the teleport. It ends naturally about 0.45 s after the teleport (the 4th pulse plays just after arrival).
- Each title is fadeIn 0, stay 20, fadeOut 0. Use the title and subtitle texts and colors from the previous update (#F589F0 pink, number #F2655A, NORMAL title size).
- No screen tint, no blindness, no camera or FOV change, no sound or particles on arrival. Only the chat line.

SOUND
- grtp:warmup is the full natural sound, 3.45 s long, stereo and centered. Four pulses: about 0 s, 1 s, 2 s and 3 s after it starts. Each pulse is a short burst around 480 Hz followed by a low rumble of 110-170 Hz. The last pulse ends with a bright click around 2.1 kHz and fades out.
- Play it with the same positional call as the other custom sounds (volume 4.0, pitch 1.0, MASTER). Never change its pitch.

PARTICLES (copy the intensity; it is constant, NOT increasing per second)
- Particle.ENCHANT only, the white-lavender rune glyphs. Send to the warming-up player only (player.spawnParticle).
- Every tick from tick 0 to tick 59, spawn the same burst. Do NOT use a per-second ramp:
  player.spawnParticle(Particle.ENCHANT, player.getEyeLocation(), 8, 1.2, 0.9, 1.2, 0.6);
- Target look to tune against the reference: about 65 separate glyph shapes visible on screen at the same time (about 25 glyphs), covering about 1.6% of the screen. Glyph cover builds up over the first 0.5 s and then stays level until the teleport. Glyphs range from tiny far ones to large ones near the camera, drifting slowly around the player within 1-3 blocks.
- If it looks too thin or too dense in game, change only the count (8). Keep it constant for the whole warmup.
Kodari AI
KodariNov 2 at 10:15 am 1
  • Change simple mode to the fixed 0/20/40/60-tick timeline and constant particle burst.

  • Keep the warmup sound separate from cinematic cues; play it once at tick 0 and let it finish after teleport.

  • Update warmup title/subtitle defaults to the requested text, colors, and normal sizing.

Updated SIMPLE mode to the reference timeline: titles at ticks 0, 20, and 40; constant 8-particle bursts through tick 59; teleport and title clear at tick 60. The warmup sound plays only once at tick 0 and is not stopped on arrival, keeping it separate from cinematic cue sounds. Updated the warmup text and colors, with normal-sized title text.

Kodari can make mistakes. Review important code before using.
Files
src
build.gradle
README.md
settings.gradle
Code
23 3,254
src/main/java/com/kodari/cinematicrtp/CinematicRTPPlugin.java
package com.kodari.cinematicrtp;

import net.kyori.adventure.text.minimessage.MiniMessage;
import org.bukkit.Bukkit;
import org.bukkit.World;
import org.bukkit.entity.Player;
import org.bukkit.permissions.Permission;
import org.bukkit.permissions.PermissionDefault;
import org.bukkit.plugin.java.JavaPlugin;
import org.bukkit.plugin.ServicePriority;
import org.bukkit.configuration.InvalidConfigurationException;
import org.bukkit.configuration.file.YamlConfiguration;

import java.io.File;
import java.io.IOException;
import java.io.InputStreamReader;
import java.nio.charset.StandardCharsets;
import java.util.Map;
import java.util.Locale;
import java.util.UUID;

public final class CinematicRTPPlugin extends JavaPlugin implements GrtpApi {
    private TaskScheduler taskScheduler;
    private Messages messages;
    private OptionalHooks optionalHooks;
    private PlayerStateStore stateStore;
    private CinematicPreferenceStore cinematicPreferences;
    private SafeLocationFinder locationFinder;
    private RtpManager rtpManager;

    @Override
    public void onEnable() {
        saveDefaultConfig();
        taskScheduler = new TaskScheduler(this);
        optionalHooks = new OptionalHooks(this);
        messages = new Messages(this, optionalHooks);
        try {
            reloadPlugin();
        } catch (IOException | InvalidConfigurationException | IllegalArgumentException exception) {
            getLogger().severe("Configuration could not be loaded: " + exception.getMessage());
            Bukkit.getPluginManager().disablePlugin(this);
            return;
        }
        stateStore = new PlayerStateStore(this);
        cinematicPreferences = new CinematicPreferenceStore(this);
        locationFinder = new SafeLocationFinder(this, taskScheduler, optionalHooks);
        rtpManager = new RtpManager(this, taskScheduler, messages, optionalHooks, stateStore, locationFinder);

        for (World world : Bukkit.getWorlds()) {
            ensureWorldPermission(world.getName());
        }
        Bukkit.getPluginManager().registerEvents(new RtpListener(this, rtpManager, stateStore, taskScheduler), this);
        getCommand("rtp").setExecutor(new RtpCommand(this, rtpManager, messages));
        getCommand("rtpcinematic").setExecutor(new RtpcinematicCommand(this, messages));
        Bukkit.getServicesManager().register(GrtpApi.class, this, this, ServicePriority.Normal);
        if (Bukkit.getPluginManager().isPluginEnabled("PlaceholderAPI")) {
            new GrtpPlaceholderExpansion(this).register();
        }
        hideCinematicHelpTopics();
        getLogger().info("Grtp enabled.");
    }

    @Override
    public void onDisable() {
        if (rtpManager != null) {
            rtpManager.shutdown();
        }
        if (stateStore != null) {
            stateStore.flush();
        }
        if (cinematicPreferences != null) {
            cinematicPreferences.flush();
        }
    }

    void reloadPlugin() throws IOException, InvalidConfigurationException {
        File configFile = new File(getDataFolder(), "config.yml");
        YamlConfiguration candidate = new YamlConfiguration();
        candidate.options().parseComments(true);
        candidate.load(configFile);
        YamlConfiguration defaults;
        try (InputStreamReader reader = new InputStreamReader(getResource("config.yml"), StandardCharsets.UTF_8)) {
            defaults = new YamlConfiguration();
            defaults.options().parseComments(true);
            defaults.load(reader);
        }
        candidate.setDefaults(defaults);
        candidate.options().copyDefaults(true);
        validate(candidate);

        String messagesPath = candidate.getString("messages-file", "messages.yml");
        YamlConfiguration messageCandidate = messages.prepareReload(messagesPath);

        candidate.save(configFile);
        messageCandidate.save(new File(getDataFolder(), messagesPath));
        reloadConfig();
        getConfig().setDefaults(defaults);
        getConfig().options().copyDefaults(true);
        messages.applyReload(messageCandidate);
    }

    private void validate(YamlConfiguration config) {
        MiniMessage miniMessage = MiniMessage.miniMessage();
        if (config.getString("prefix") == null) {
            throw new IllegalArgumentException("prefix must be a MiniMessage string");
        }
        if (config.getString("messages-file") == null || config.getString("messages-file").isBlank()) {
            throw new IllegalArgumentException("messages-file must name a messages YAML file");
        }
        validateMiniMessage(miniMessage, config.getString("prefix"), "prefix");
        if (config.getInt("cooldown-seconds", -1) < 0) {
            throw new IllegalArgumentException("cooldown-seconds cannot be negative");
        }
        if (config.getInt("warmup.seconds", 0) < 1) {
            throw new IllegalArgumentException("warmup.seconds must be at least 1");
        }
        String soundMode = config.getString("sounds.mode", "CUSTOM").trim().toUpperCase(Locale.ROOT);
        if (!java.util.Set.of("CUSTOM", "VANILLA").contains(soundMode)) {
            throw new IllegalArgumentException("sounds.mode must be CUSTOM or VANILLA");
        }
        var defaults = config.getConfigurationSection("defaults");
        if (defaults == null || defaults.getInt("min-radius", -1) < 0
                || defaults.getInt("max-radius", -1) < defaults.getInt("min-radius", 0)
                || defaults.getInt("max-attempts", 1) < 1 || defaults.getDouble("cost", 0.0) < 0) {
            throw new IllegalArgumentException("defaults min-radius/max-radius are invalid");
        }
        var worlds = config.getConfigurationSection("worlds");
        if (worlds != null) {
            for (String name : worlds.getKeys(false)) {
                var world = worlds.getConfigurationSection(name);
                if (world == null) {
                    throw new IllegalArgumentException("worlds." + name + " must be a section");
                }
                if (world.getInt("min-radius", defaults.getInt("min-radius")) < 0
                        || world.getInt("max-radius", defaults.getInt("max-radius"))
                        < world.getInt("min-radius", defaults.getInt("min-radius"))) {
                    throw new IllegalArgumentException("worlds." + name + " has invalid radius limits");
                }
                if (world.getInt("min-y", defaults.getInt("min-y"))
                        > world.getInt("max-y", defaults.getInt("max-y"))) {
                    throw new IllegalArgumentException("worlds." + name + " has min-y above max-y");
                }
                if (world.getInt("max-attempts", defaults.getInt("max-attempts")) < 1
                        || world.getDouble("cost", defaults.getDouble("cost")) < 0
                        || world.getInt("cooldown-seconds", config.getInt("cooldown-seconds")) < 0) {
                    throw new IllegalArgumentException("worlds." + name + " has an invalid cost, cooldown, or attempt limit");
                }
                String center = world.getString("center", "spawn");
                if (!center.equalsIgnoreCase("spawn") && !center.equalsIgnoreCase("border")) {
                    String[] coordinates = center.split(",", 2);
                    if (coordinates.length != 2) {
                        throw new IllegalArgumentException("worlds." + name + " center must be spawn, border, or x,z");
                    }
                    try {
                        double x = Double.parseDouble(coordinates[0].trim());
                        double z = Double.parseDouble(coordinates[1].trim());
                        if (!Double.isFinite(x) || !Double.isFinite(z)) {
                            throw new NumberFormatException("coordinates must be finite");
                        }
                    } catch (NumberFormatException exception) {
                        throw new IllegalArgumentException("worlds." + name + " center has invalid coordinates", exception);
                    }
                }
            }
        }
        if (config.getInt("camera.ascent.finding-title-tick", -1) < 0
                || config.getInt("camera.ascent.hold-after-stages-ticks", -1) < 0
                || config.getInt("blackout.blindness-ticks", 0) < 1) {
            throw new IllegalArgumentException("camera and blackout timings must be non-negative");
        }
        validateCameraStages(config, "camera.ascent.stages");
        validateCameraStages(config, "camera.descent.stages");
        for (String path : java.util.List.of("camera.ascent.title", "blackout.title", "landing.title")) {
            var timings = config.getConfigurationSection(path);
            if (timings != null && (timings.getInt("fade-in-ticks", 0) < 0
                    || timings.getInt("stay-ticks", 0) < 0 || timings.getInt("fade-out-ticks", 0) < 0)) {
                throw new IllegalArgumentException(path + " timings cannot be negative");
            }
        }
        for (String path : java.util.List.of("text.title-style", "bedrock.title-style")) {
            String style = config.getString(path, "NORMAL").trim().toUpperCase(java.util.Locale.ROOT);
            if (!java.util.Set.of("SMALL", "NORMAL", "SUBTITLE_ONLY").contains(style)) {
                throw new IllegalArgumentException(path + " must be SMALL, NORMAL, or SUBTITLE_ONLY");
            }
        }
        for (String path : java.util.List.of("cinematic.titles", "cinematic.subtitles")) {
            var section = config.getConfigurationSection(path);
            if (section != null) {
                for (String key : section.getKeys(false)) {
                    String value = section.getString(key);
                    if (value != null) {
                        validateMiniMessage(miniMessage, value, path + "." + key);
                    }
                }
            }
        }
        String font = config.getString("cinematic.font", "").trim();
        if (!font.isEmpty()) {
            validateMiniMessage(miniMessage, "<font:" + font + ">font-check</font>", "cinematic.font");
        }