Create a standalone Bukkit/Paper plugin for the new StoneStrenght project. It was inspected and is empty, so establish a minimal Gradle project with a supported Paper API and Java target, plugin.yml metadata, and implementation. Plugin author must be exactly Supertallgamer. Feature: a common Strength SMP progression mechanic: start players at level 0 (no plugin-granted Strength); on each player kill, killer gains one Strength tier, capped at 5 (Strength V); when a player dies, their tier decreases by one, floor 0. Do not grant kill progression for non-player kills, and avoid rewarding self-kills. Persist each player's level by UUID across reconnects/restarts. Apply the matching vanilla PotionEffectType.STRENGTH effect to online players (tier N maps to amplifier N-1) with a long duration and refresh safely so it remains active; remove the plugin's Strength effect when tier drops to 0, without unnecessarily removing a stronger Strength effect applied by another source if reasonably distinguishable. Apply state on join and after respawn. Prevent level overflows and ensure repeated event handling cannot duplicate progression. All player-facing notifications, if sent, must begin exactly [StoneSMP] ; send concise gain/loss messages and do not spam a success message when a player is already capped or at zero. No unrelated abilities, commands, crafting, or rank integration. Add sensible descriptions/metadata. Inspect/create according to project conventions. Do not build or claim verification; compilation will be performed separately.

Kodari AI
KodariOct 17 at 9:13 pm 1
StoneStrength
A Bukkit/Paper plugin implementing a Strength SMP progression mechanic. Players start at level 0 with no plugin-granted Strength. On each player kill, the killer gains one Strength tier (capped at 5, Strength V). When a player dies, their tier decreases by one (floor 0). Non-player kills and self-kills do not grant progression. Player levels persist by UUID across reconnects and restarts via YAML storage. The plugin applies the matching vanilla PotionEffectType.STRENGTH effect (tier N maps to amplifier N-1) with a long duration, refreshing safely to keep it active. When tier drops to 0, the plugin's Strength effect is removed without removing stronger Strength effects from other sources. State is applied on join and after respawn. Player notifications begin with `[StoneSMP] `, with concise gain/loss messages and no spam when capped or at zero.
  • Establish a Java 21 Gradle project targeting Paper 1.21.4.

  • Add plugin metadata with author Supertallgamer.

  • Implement persistent, capped Strength progression and safe potion-effect refresh/removal.

[Generation stopped]

Continue and complete the StoneStrenght plugin implementation. The project was previously inspected as empty, but a cancelled earlier task may have left partial files: inspect all existing files and retain/fix useful work. Implement a standalone Bukkit/Paper plugin with a minimal Gradle setup, compatible Paper API / Java target, plugin.yml metadata, and source. Exact plugin author: Supertallgamer. Feature: common Strength SMP progression: players start at level 0 (no plugin-granted Strength); each player kill grants the killer one Strength tier, maximum tier 5 (Strength V); when a player dies, their tier decreases by one, minimum 0. No progression on non-player kills, avoid self-kill rewards. Persist level per UUID across reconnects/restarts. Apply matching vanilla PotionEffectType.STRENGTH to online players (tier N maps to amplifier N-1) with long duration and safely refresh it. Remove the plugin-managed Strength effect when tier falls to 0; avoid unnecessarily removing a stronger effect from another source if reasonably possible. Apply saved state on join and after respawn. Guard caps/floors and avoid duplicate event handling. IMPORTANT message styling correction: player-facing gain/loss messages, if included, must be plain player messages WITHOUT a [StoneSMP] prefix (do not add that prefix to them). Any server-wide/broadcast/server-originated announcement, if one is included, must begin exactly [StoneSMP] . Keep feedback concise and do not message on an unchanged capped/zero state. No unrelated abilities, commands, crafting, or rank integration. Finish implementation only; do not build or claim verification.

Kodari AI
KodariOct 17 at 9:15 pm 1
  1. Inspect any files left by the cancelled attempt.

  2. Keep or repair useful project setup and add only the progression implementation.

  3. Ensure plugin metadata, UUID persistence, capped/floored progression, and safe effect ownership handling.

Implemented the standalone StoneStrenght plugin with Paper 1.21.4 / Java 21 setup, author Supertallgamer, UUID-based level storage in players.yml, and capped kill/death Strength progression. Effects are refreshed for online players, reapplied on join/respawn, and managed Strength is removed at tier 0 when distinguishable from a stronger external effect. Player gain/loss messages are plain and only sent when the tier changes.

D

minimum is 1, also what does every tier do? tell me specifically

Kodari AI
KodariOct 17 at 9:19 pm 1

Minimum tier is now 1: new players start at Strength I, and deaths reduce them by one tier down to Strength I. Existing saved levels below 1 are raised to 1. No death-loss message is sent at the minimum.

In vanilla Minecraft, each Strength tier adds 3 attack damage (+1.5 hearts) to melee attacks:

  • I: +3 damage (+1.5 hearts)

  • II: +6 damage (+3 hearts)

  • III: +9 damage (+4.5 hearts)

  • IV: +12 damage (+6 hearts)

  • V: +15 damage (+7.5 hearts)

Each player kill advances the killer by one tier, up to Strength V.

D

no, make minimum 0 (no strength so no one can steal from u)

also add /strength info to see how much u already have. add /strength revoke <number> to take out the desired number of strength and its in ghast tears, when u use a ghast tear it applies to your strength, players drop a ghasttear upon dying so the person who picks it up gets to use the ghast tear and claim the strength

Kodari AI
KodariOct 17 at 9:25 pm 1

Implemented:

  • Strength ranges from 0–5. New players start at 0; kills grant the killer one tier, and deaths remove one tier, down to 0.

  • A player who dies with Strength drops one custom Ghast Tear representing the tier lost. Deaths at tier 0 drop no tear. Right-click a tear to gain one tier; at tier 5, it is not consumed.

  • /strength info shows your current tier. /strength revoke <number> removes that many tiers and gives you the same number of usable tears.

  • Levels persist by UUID. Player-facing messages are plain, without a [StoneSMP] prefix.

I did not build or verify the project.

D

add tab completion

Kodari AI
KodariOct 17 at 9:28 pm 1

Added tab completion for /strength info, /strength revoke, and valid revoke amounts from 1 up to your current Strength tier.

D

i dont see it

1 image attached
Kodari AI
KodariOct 17 at 9:30 pm 1

The screenshot shows /strength Supertallgamer, but that isn’t a valid form of this command. Tab-complete the subcommands after typing /strength : choose info or revoke. To withdraw tiers as Ghast Tears, type /strength revoke and press Tab to see the valid amounts. A player name isn’t accepted; revoke applies to your own Strength. If you have 0 Strength, there are no amounts to suggest.

D

can u fix the tabcompletion to not sat my username?

Kodari AI
KodariOct 17 at 9:31 pm 1

Updated tab completion to offer only info or revoke as the first argument, including when the server supplies no argument yet. It will not suggest player names.

D

make it atleast say i have no stgrenght available

1 image attached
Kodari AI
KodariOct 17 at 9:31 pm 1

I’ll adjust revoke tab completion so tier 0 gets a clear “no Strength available” suggestion instead of an empty list.

When you use /strength revoke with 0 Strength, it now says: “You have no Strength available to revoke.”

D

add /strength grant <user> <number> (it gives the chosen user the custom named ghasttears) also, make everyone begin at 1

Kodari AI
KodariOct 17 at 9:37 pm 1
  1. Add /strength grant <user> <number> with online-player targeting and custom Ghast Tears.

  2. Set new players’ starting tier to 1 while keeping the existing 0–5 range and death floor.

Added /strength grant <user> <number>. It grants the online player that many custom-named Strength Ghast Tears; tab completion suggests online names and amounts 1–5. New players now start at tier 1, while the existing death floor remains tier 0.

D

btw, make strength revoke op only if u didnt yet

Kodari AI
KodariOct 18 at 6:32 am 1

[Generation stopped]

D

no, i meant grant. revoke is available to anyone

Kodari AI
KodariOct 18 at 6:33 am 1

/strength grant <user> <number> now requires the stonestrength.grant permission, granted to operators by default. /strength revoke remains available to everyone.

Kodari can make mistakes. Review important code before using.
Files
src
build.gradle
settings.gradle
Code
7 493
src/main/java/com/supertallgamer/stonestrength/StoneStrengthPlugin.java
package com.supertallgamer.stonestrength;

import org.bukkit.plugin.java.JavaPlugin;

public final class StoneStrengthPlugin extends JavaPlugin {
    private PlayerStrengthManager strengthManager;

    @Override
    public void onEnable() {
        strengthManager = new PlayerStrengthManager(this);
        strengthManager.load();
        getServer().getPluginManager().registerEvents(new StrengthProgressionListener(this, strengthManager), this);
        StrengthCommand strengthCommand = new StrengthCommand(strengthManager);
        getCommand("strength").setExecutor(strengthCommand);
        getCommand("strength").setTabCompleter(strengthCommand);
        long refreshInterval = 20L * 60 * 30;
        getServer().getScheduler().runTaskTimer(this, strengthManager::refreshOnlinePlayers, refreshInterval, refreshInterval);
    }

    @Override
    public void onDisable() {
        if (strengthManager != null) {
            strengthManager.save();
        }
    }
}